Product Detail
310S Stainless Steel Plate

310S Stainless Steel Plate

Surface： No.1, 1D, 2D, 2B, Polished, Brushed, Mirror, Customized
Size： Customized
Material： 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S 309S, 410, 410S,420, 430, 431, 440A,904L
Color： Customized
MOQ： 5 Tons
Sample： Provide
+86 18678856983  CONTACT
Detail

DESCRIPTION

Type 310 stainless is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 °F. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450 °F.

CHEMISTRY TYPICAL

Carbon: 0.25 max
Phosphorus: 0.045 max
Silicon: 1.50 max
Nickel: 19.00-22.00
Manganese: 2.00 max
Sulfur: 0.030 max
Chromium: 24.00-26.00
Molybdenum: 0.75 max
Copper: 0.50 max
Iron: Balance

PHYSICAL PROPERTIES

Density: 0.289 lbs/in3 8.00 g/cm3

Electrical Resistivity: ohm-cir-mil/ft: At 70 °F (21 °C): 469.0

Specific Heat: BTU/lb-°F (J/g-°C):
32 - 212 °F (0 - 100 °C): 0.12 (0.50)

Thermal Conductivity: BTU-in/hr-ft2-°F (W/m•K):
32 - 212 °F (0 - 100 °C): 112 (16.2)

Mean Coefficient of Thermal Expansion: µin/in-°F (µm/m-°C)
32 - 212 °F (0 - 100 °C): 8.78 (15.8)
32 - 599 °F (0 - 315 °C): 9.00 (16.2)
32 - 1000 °F (0 - 540 °C): 9.39 (16.9)
32 - 1200 °F (0 - 650 °C): 10.6 (19.1)

Modulus of Elasticity: ksi (MPa)
28 - 29 x 103 (193 - 200 x 103) in tension
Magnetic Permeability, H = 200: Annealed   1.008

Melting Range: 2550 - 2650 °F (1400 - 1455 °C)

PROPERTIES: TEMPERED

Alloy 310 can be cold worked to various tempers. Contact Ulbrich Technical Service for additional information.

ADDITIONAL PROPERTIES

CORROSION RESISTANCE

Refer to NACE (National Association of Corrosion Engineers) for recommendations.

FINISHES

# 1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required. # 2D - Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process. # 2B - Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D. #BA- Bright annealed cold rolled and bright annealed #CBA- Course bright annealed cold rolled matte finish and bright anneal #2 - Cold Rolled # 2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part. Polished - Various grit finish for specific polish finished requirements. * Not all finishes are available for all alloys - Contact Ulbrich Sales for more information.

WIRE FINISHES

XC - Extra clean bright annealed or bright annealed and cold rolled Grease - Ultra-bright finish (for decorative applications) Soap - Soap is not removed from tempered wire to act as a lubricant. * Contact Ulbrich Wire for custom wire finishes.
CUSTOMER VISITING
ABUIABACGAAgzf3-igYogNbh3wcw6Ac4gAU
OUR FACTORY
CERTIFICATE
ABUIABACGAAgr5bYiAYo_qXuuAcw7gU4pQM
FAQ：

Q: What are the main products you can supply?

A: We are the professional and famous factory in China for Stainless Steel Sheet/Coils/Tubes/Profiles/Composite packaging Materials; Aluminum; Copper; Alloy Steel; Corten Steel; Wear Resistant Steel and Carbon Steels.


Q: Will your company could accept the customized and OEM products?

A: Yes, we can do the production based on your drawings and with your logo, also because we have a very strong design and development team, so the feedback is very good for customized products.


Q: What are the advantages of your company?

A:(1): Prime quality and reasonable price.

(2): Wide excellent experiences with after-sale service.

(3): Every process will be checked by responsible QC which insures every product's quality.

(4): Professional packing teams which keep every packing safely.

(5): Trial order can be done in one week.

(6): Samples can be provided as your requirements.


Q: What are your payment terms?

A: Commonly two payment terms for new customers,

1) 30%T/T as deposit, 70% balance against B/L copy.

2) 100% Irrevocable L/C at sight.

If you need other terms, please feel free to contact us too, we will try our best.


Q: How about the samples? Is it free to pay extra fees?

A: Yes, we would like to supply the samples before order, if the samples are from stock, it will be free, if the samples are from new production, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.


Q: How long is your delivery time?

A: Our daily inventory is more than 8000 tons, so far common products size, just need 5 days from stocks; if the special size from new production, delivery 20-30 days.

Different products have different delivery times. The products will be delivered as soon as possible on the basis of quality assurance.


Q: How to control and guarantee your shipment quality?

A:1) All our factories are ISO9001 certified facilities;

2) World famous origin mills as TISCO, Baosteel;

3) Ex factory inspection by our own laboratory;

4) SGS/BV Third party inspection before delivery.