Product Detail
Titanium Grade 1 UNS R50250

Titanium Grade 1 UNS R50250

Surface： Grade 1 Titanium alloy
Size： Titanium alloy
Material： ASTM B265 ASTM F136 ASTM F67 AMS4928
Color： Customized
MOQ： 10 KGS
Sample： Provide
+86 18678856983  CONTACT
Detail

(Commercially Pure Titanium: Grade 1)TI35A Strip, Coil, Foil, Wire, ASTM B265 GR1, ASTM F67

APPLICATIONS


TITANIUM GRADE 1 DESCRIPTION

Commercially Pure Titanium Grade 1 is one of the softest and most ductile grades exhibiting the greatest formability. This unalloyed titanium has excellent corrosion resistance property, excellent weldability and is used in a wide variety of applications. This grade material is mainly used in marine and chemical industries where the parts are subjected to very harsh environments. This material is also used for fabricating anodes for cathodic protection applications.

CHEMISTRY TYPICAL

Titanium: Balance
Iron: 0.20 max
Oxygen: 0.18 max
Carbon: 0.08 max
Nitrogen: 0.03 max
Hydrogen: 0.015 max
Residuals each 0.10 max, total 0.40 max

PHYSICAL PROPERTIES OF GRADE 1 TITANIUM

Density: 0.163 lbs/in3 , 4.51 g/cm3

Mean Coefficient of Thermal Expansion, in/in/° F (mm/m/° C):
70 - 212 ° F (20 - 100 ° C): 4.78 x 10-5 (8.6)

Thermal Conductivity: BTU-in/h-ft-° F (W/m-° K):
At 70 ° F (21 °C): 111 (16)

Modulus of Elasticity, ksi (MPa): 15.2 x 103 (105 x 103) in tension

Melting Point: 3040 ° F (1670 ° C)

FORMS

Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square

MECHANICAL PROPERTIES OF GRADE 1 TITANIUM AT ROOM TEMPERATURE

PROPERTIES ANNEALED:

Ultimate Tensile Strength: 35 KSI min (240 MPa min )
Yield Strength (0.2% offset): 25 - 45 KSI (170 - 310 MPa )
Elongation: 24%

PROPERTIES: TEMPERED

Titanium Grade 1 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information.

COMMON TITANIUM GRADE NAMES

Name

Code

Description 1Description 2ASTMAMSUNS
Grade 1 TitaniumTI35AUnalloyed TitaniumCommercially Pure TitaniumB-265, F-67
R50250



ADDITIONAL PROPERTIES

CORROSION RESISTANCE OF GRADE 1 TITANIUM

Refer to NACE (National Associate of Corrosion Engineers) for recommendations.

FINISHES

#1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
#2D - Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process.
#2B - Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BA - Bright annealed cold rolled and bright annealed
#CBA - Course bright annealed cold rolled matte finish and bright anneal
#2 - Cold Rolled
#2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part.
Polished - Various grit finish for specific polish finished requirements.

WIRE FINISHES

XC - Extra clean. Bright annealed or bright annealed and cold rolled Grease - Ultra bright finish for decorative applications
Soap - Soap is not removed from tempered wire to act as a lubricant. * Contact Ulbrich Wire for custom finishes.

HEAT TREATMENT

Titanium Grade 1 can only be hardened by cold work.


Tniuff m Grade 1 UNS


Package&Transport
Prev 1 2 3 Next
CUSTOMER VISITING
ABUIABACGAAgzf3-igYogNbh3wcw6Ac4gAU
OUR FACTORY
CERTIFICATE
ABUIABACGAAgr5bYiAYo_qXuuAcw7gU4pQM
FAQ：

Q: What are the main products you can supply?

A: We are the professional and famous factory in China for Stainless Steel Sheet/Coils/Tubes/Profiles/Composite packaging Materials; Aluminum; Copper; Alloy Steel; Corten Steel; Wear Resistant Steel and Carbon Steels.


Q: Will your company could accept the customized and OEM products?

A: Yes, we can do the production based on your drawings and with your logo, also because we have a very strong design and development team, so the feedback is very good for customized products.


Q: What are the advantages of your company?

A:(1): Prime quality and reasonable price.

(2): Wide excellent experiences with after-sale service.

(3): Every process will be checked by responsible QC which insures every product's quality.

(4): Professional packing teams which keep every packing safely.

(5): Trial order can be done in one week.

(6): Samples can be provided as your requirements.


Q: What are your payment terms?

A: Commonly two payment terms for new customers,

1) 30%T/T as deposit, 70% balance against B/L copy.

2) 100% Irrevocable L/C at sight.

If you need other terms, please feel free to contact us too, we will try our best.


Q: How about the samples? Is it free to pay extra fees?

A: Yes, we would like to supply the samples before order, if the samples are from stock, it will be free, if the samples are from new production, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.


Q: How long is your delivery time?

A: Our daily inventory is more than 8000 tons, so far common products size, just need 5 days from stocks; if the special size from new production, delivery 20-30 days.

Different products have different delivery times. The products will be delivered as soon as possible on the basis of quality assurance.


Q: How to control and guarantee your shipment quality?

A:1) All our factories are ISO9001 certified facilities;

2) World famous origin mills as TISCO, Baosteel;

3) Ex factory inspection by our own laboratory;

4) SGS/BV Third party inspection before delivery.