Product Detail
Hastelloy® C-276 UNS N10276

Hastelloy® C-276 UNS N10276

Surface： Hastelloy® C-276
Size： Hastelloy
Color： Primary color
+86 18678856983  CONTACT
Detail

Hastelloy® C-276 is a versatile nickel-molybdenum-chromium-tungsten

alloy fit for applications that demand a supreme level of corrosion resistance.



Hastelloy C-276 Strip, Coil, Foil, Wire, ASTM B582

APPLICATIONS OF HASTELLOY C-276

  • Bellows

  • Marine hardware

  • Chemical processing

  • Agrichemical production

  • Petrochemical production

DESCRIPTION OF HASTELLOY C-276

Hastelloy® C-276 is a very versatile nickel-molybdenum-chromium-tungsten alloy with excellent corrosion resistance and good fabricability. While it does have good oxidation resistance up to 1800°F, Hastelloy alloy C-276 is generally not recommended for elevated temperature service.

Nickel Alloy C-276 has resisted the formation of grain boundary precipitates in the weld-heat affected zone, making it a candidate for most chemical and petrochemical processing applications in the as-welded condition. HC276 is a nickel alloy that is has excellent resistance to reducing acids, sulfuric acid, hydrochloric acid, brine solutions, oxidizing chlorides, and hot seawater.

Hastelloy C-276 is also one of the few materials resistant to wet chlorine gas, hypochlorite and chlorine dioxide. This particular nickel alloy has exceptional resistance to crevice corrosion and stress corrosion cracking, as well as chloride pitting. It's low carbon content minimizes carbide precipitation during welding preserves its excellent resistance to corrosion during welding. This translates to C-276 being readily fabricated by welding using methods similar to those utilized for nickel-based alloys.

Hastelloy C-276 is also known as:

  • Nickel C-276

  • Alloy C-276

  • Inconel C-276

WHAT IS THE CHEMISTRY OF HASTELLOY C-276?

ElementMinMax
NickelBalanceBalance
Chromium
14.50
16.50
Molybdenum
15.00
17.00
Iron4.00
7.00
Tungsten3.00
4.50
Cobalt2.50
2.50
Manganese1.00
1.00
Carbon0.0100.010
Vanadium0.35
0.35
Silicon0.080.08
Sulfur0.0300.030
Phosphorous0.040
0.040

WHAT ARE THE PHYSICAL PROPERTIES OF HASTELLOY C-276?

Density: 0.321 lbs/in3, 8.89 g/cm3

Mean Coefficient of Thermal Expansion: in/in/° F (mm/m/ °C):
70 - 212 °F (20 - 100 ° C): 6.2 x 10-5 (11.2)

Thermal Conductivity: BTU-in/h-ft-°F (W/m-°K):
70 °F (21 °C): 71 (10.2)

Modulus of Elasticity: ksi (MPa)
29.8 x 103 (205 x 103) in tension

Melting Point: 2500 °F (1371 °C)

HASTELLOY FORMS SUPPLIED BY ULBRICH

Hastelloy C-276 Coils

  • Hastelloy C-276 Strip

  • Hastelloy C-276 Foil

  • Hastelloy C-276 Ribbon

Hastelloy C-276 Wire Profiles

  • Hastelloy C-276 Shaped Wire Profiles

  • Hastelloy C-276 Round Wire

  • Hastelloy C-276 Flat Wire

  • Hastelloy C-276 Square Wire

MECHANICAL PROPERTIES AT ROOM TEMPERATURE

ANNEALED PROPERTIES OF HASTELLOY C-276

Ultimate Tensile Strength: 100 KSI min (690 MPa min)
Yield Strength: (0.2% offset) 45 KSI min (31 0 MPa min)
Elongation: 40% min
Hardness: Rb 100 min (aim)

TEMPERED:

Hastelloy® C-276 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information.

ADDITIONAL PROPERTIES

HASTELLOY C-276 CORROSION RESISTANCE DATA

HASTELLOY C-276 is a nickel-chromium-molybdenum alloy with universal corrosion resistance unmatched by any other alloy. It has outstanding resistance to a wide variety of chemical process environments including hot contaminated mineral acids, ferric and cupric chlorides,solvents, chlorine and chlorine contaminated (both organic and inorganic), dry chlorine, acetic anhydride, formic and acetic acids, sea water and brine solutions, chlorine dioxide solutions, and hypochlorite.

For more information on Alloy C276 refer to NACE (National Associate of Corrosion Engineers) for recommendations.

AVAILABLE FINISHES FOR HASTELLOY C276

#1Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
#2D
Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process.
#2BSmooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#CBACourse bright annealed cold rolled matte finish and bright anneal
#2Cold Rolled
#2BASmooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part
Package&Transport
Prev 1 2 3 Next
CUSTOMER VISITING
ABUIABACGAAgzf3-igYogNbh3wcw6Ac4gAU
OUR FACTORY
CERTIFICATE
ABUIABACGAAgr5bYiAYo_qXuuAcw7gU4pQM
FAQ：

Q: What are the main products you can supply?

A: We are the professional and famous factory in China for Stainless Steel Sheet/Coils/Tubes/Profiles/Composite packaging Materials; Aluminum; Copper; Alloy Steel; Corten Steel; Wear Resistant Steel and Carbon Steels.


Q: Will your company could accept the customized and OEM products?

A: Yes, we can do the production based on your drawings and with your logo, also because we have a very strong design and development team, so the feedback is very good for customized products.


Q: What are the advantages of your company?

A:(1): Prime quality and reasonable price.

(2): Wide excellent experiences with after-sale service.

(3): Every process will be checked by responsible QC which insures every product's quality.

(4): Professional packing teams which keep every packing safely.

(5): Trial order can be done in one week.

(6): Samples can be provided as your requirements.


Q: What are your payment terms?

A: Commonly two payment terms for new customers,

1) 30%T/T as deposit, 70% balance against B/L copy.

2) 100% Irrevocable L/C at sight.

If you need other terms, please feel free to contact us too, we will try our best.


Q: How about the samples? Is it free to pay extra fees?

A: Yes, we would like to supply the samples before order, if the samples are from stock, it will be free, if the samples are from new production, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.


Q: How long is your delivery time?

A: Our daily inventory is more than 8000 tons, so far common products size, just need 5 days from stocks; if the special size from new production, delivery 20-30 days.

Different products have different delivery times. The products will be delivered as soon as possible on the basis of quality assurance.


Q: How to control and guarantee your shipment quality?

A:1) All our factories are ISO9001 certified facilities;

2) World famous origin mills as TISCO, Baosteel;

3) Ex factory inspection by our own laboratory;

4) SGS/BV Third party inspection before delivery.